Lorex Technology L3104 Uživatelský manuál stáhnout pdf (Strana 29)

Voice Setup

Overwrite Setup

Allows the DVR to overwrite previously recorded data, or to stop the recording once the hard

drive is full.

1. OVERWRITE: Allows the Hard Drive data to be overwritten once the drive becomes full. Press

the K and L buttons to highlight, and press the ENTER button to set to ON or OFF.

NOTE: If Overwrite is set to OFF, recording will stop once the drive is full.

2. WARNING SIGNAL: Turns the Hard Drive Overwrite Warning to ON/OFF. Press the K and L

buttons to highlight, and press the ENTER button to change the setting. If set to ON, a warning

signal will sound once the drive reaches 95% capacity (for the length of time set in the Warning

Duration)

3. WARNING DURATION: Sets the duration for the Warning Alarm to be active. Press the K and

L buttons to highlight, and press the ENTER button

Voice Setup

1. VOICE RECORD: Allows Voice (sound) to be recorded to the Hard Drive. Press the K and L

buttons to highlight, and press the ENTER button to set to ON or OFF.

2. VOICE REPLAY: Allows previously Recorded Voice (sound) to be played back on the DVR.

Press the K and L buttons to highlight, and press the ENTER button to set to ON or OFF.

3. VOICE CHANNEL: Sets the channel for Voice Recording. Press the K and L buttons to highlight,

and press the + and - buttons set to CH1, CH2, CH3, CH4 or QUAD.

4. VOICE VOLUME: Sets the Volume level for the DVR unit. Press the K and L buttons to highlight,

and press the + and - buttons to change the volume setting to 1 (low) to 10 (high), or mute.

Overwrite Setup

Overwrite: ON

Warning Signal: OFF

Warning Duration: 10 Sec

Voice Setup

Voice Record: OFF

Voice Replay: ON

Voice Channel: 1 CH

Voice Volume: 8

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 61 62

Žádné komentáře

Lorex Technology L3104 Uživatelský manuál Strana 29